Sliding wardrobe in a hall and a photo of possible models with characteristics

When designing the entrance area in the apartment, many choose a wardrobe in the hallway, a photo of which can be seen in the selection. There are so many design ideas that it’s hard to decide right away. After all, you need to decide what material it is better to make from, determine the size, fit into the interior of the hallway. The best option would be a closet in the hallway in individual sizes. To do this, you need to contact a furniture company, where you will be given a sketch, models will be selected, and they will be engaged in the development of internal content. Stuffing is an important component. They will make the design of the closet for the entrance hall. Then it is ideal in size, will look good in the interior of the hallway.

Advantages and disadvantages

Entrance hall with wardrobe, designed for outerwear. Therefore, the furniture should be roomy enough. In the niche for hats, shoes you need to put seasonal things for the whole family. These requirements are most consistent with the compartment in the hallway.

Advantages of a wardrobe for a hallway:

spaciousness;
functionality, doors do not occupy excess space;
versatility and convenience, can have any content;
combinatorial, you can choose different segments;
esthetic appeal, any design decisions are embodied.

Sliding wardrobes in the hallway with a hanger are suitable for almost all rooms, except for a very small one, where they cannot be placed. This is their main drawback.

Varieties

The design of the closet in the hallway is so different that it is difficult to immediately decide which one to choose. The main types of models can be distinguished:

By configuration

By configuration, such furniture happens:

straight;
angular;
diagonal;
radius (semicircular cabinet);
n shaped.

Often an open hanger option. Straight large cabinet, the most common model.Corner models are suitable for small hallways, or when there is not enough space on one of the walls for a direct cabinet. The lateral ends can be beveled or rounded. The design of the diagonal product is ideal when there is a small angle, but which is small for a full-fledged corner kit.

Modern design and production allow us to design and manufacture a beautiful radiused cabinet. One of the sections can be rounded, a spectacular wave is obtained. Unusual semicircular look elegant and transform the spatial perception of the room. Only good specialists can pick up and make non-standard models.

There are quite wide and long hallways. In this case, you can install a U-shaped cabinet, such a mini-dressing room. Photo furniture design, various options can be viewed thanks to the selection.

Waved

L shaped

Straight

Radius

Angular

In depth

Depth depends on the size of the room. Factory finished cabinets have a standard size of 45 and 60 centimeters. Better than 60 cm, this is a fairly roomy model. For a small hallway, it is possible to make segments with a depth of 35 cm, 30. This insufficient depth is less impractical, but still allows things to fit in.

Separately, it is worth noting that sometimes the depth of the section is 30 cm - the ideas of designers. In order that the stylish large cabinet does not seem monotonous, they make sections not only of different heights, but also depths.

Look carefully at the sliding systems of the closets, the better it is, the longer the furniture will last. It is better to choose accessories from German manufacturers.

By style

When you choose a wardrobe in the hallway from the photo, it is striking that their design depends on the style of the interior. The classic coupe dictates the use of wood textures. Oak color is especially popular. The beige model looks beautiful. The Italian headset is a striking example of this style. They are distinguished by courtesy, salon style. For the most part, these are luxury cabinets for spacious hallways. In the classical style, in addition to the main cabinet, the emphasis is on additional details: stand for umbrellas, pouf for shoes. Italy, traditionally is the legislator and the embodiment of furniture fashion. Classic cabinets are a vivid confirmation of this. You can see the options on the colorful catalogs that provide furniture stores.

The closet in the hallway in the Provence style dictates simple forms, where the emphasis is on wood textures. Used patination, the effects of an aged tree, craquelure, deliberate cracks. Light tones predominate, white. The classic style is dominated by natural textures.

For the cabinet in the style of minimalism, modern cabinets, characterized by clear lines and concise forms.

Materials of manufacture

Stylistics and design decisions dictate the material. Their samples will be presented by master furniture makers.

Wooden facades

For wood facades, special preparation of the material, wood processing is necessary. For its drying, special cameras are used, then canvases are selected and a furniture board is made. They withstand a certain time under pressure so that the tree does not lead. Only then do they start processing the material. Therefore, sliding wardrobes made of solid wood are quite expensive. They are made in the classical style, country, Provence. These facades require reliable high-quality fittings, as they are quite heavy. Such cabinets can end with 30 cm open rounded shelves, so the product takes on a finished look. Additionally, you can mount a refrigerator. They make facades of hardwood, oak, ash, alder. White wardrobes in the hallway look especially elegant. Use a rather laborious technique of painting and varnishing of wood. The closet in the hallway in the style of Provence, a wooden surface, is aged using special technology.

MDF panels

How to choose furniture in the hallway, so that it is the best option for price and quality, two in one. MDF cabinet front is an ideal choice for these parameters. Firstly, it is also a tree that has just undergone technical processing. Wood chips are pulverized and pulverized by vacuum. Top coated with MDF film or painted. On the panel, you can cut three-dimensional, embossed patterns, drawings. In the classical style make characteristic ornaments. Covered with a texture that imitates oak, ash, alder. For modern stylists use glossy painted facades of all colors and shades, from white to metallic.

Laminated board

Low-cost compartments are made of laminated board. This is a pressed glued chip covered with a thin layer of plastic. For the insides of furniture made of different materials, a laminate is used, so it is inexpensive and quite reliable. Cabinets differ only in facades. Such furniture can be made independently, to mount a refrigerator.

Glass composite materials, methods of decorating facades

Thanks to new technologies, it is possible to make facades of glass, composite materials, plastic. These are spectacular futuristic models of furniture. For stiffeners, coupes use aluminum inserts.

The facades of the cabinet can be made entirely of mirrors. This makes it possible to make a small hall visually wider.

It looks interesting coupe with sandblasting. This is the application of a matte pattern on the mirror surface. For these purposes, use sand with water under high pressure. The sandblasting method makes the cabinet an element of the decor of the interior.

Another way to make furniture spectacular is to order a facade with photo printing. Modern technology allows you to apply it both on the surface of an MDF panel, and use printing under glass. The choice of pictures is almost unlimited. Different ways of printing a picture are used.

Using modern paints, facades are painted. Fusing, a technology in which stained glass is baked. And on the surface of the facade make patterns, patterns of glass colored mosaics.

Filling and placement options

The types of cabinets, the internal content, the location of the shelves, depend on the number of family members, the dimensions of the model and the things that are supposed to be stored in it. The standard arrangement of shelves: at the top there is a section for hats, below there is a compartment for outerwear, at the bottom there are shelves for shoes. At the discretion of the customer, the filling does different things. If there is not enough space, a segment may be provided for a refrigerator, vacuum cleaner or other household items. The depth of the shelves inside can be different from 30 cm to 60 cm. Sliding wardrobes with a mezzanine in the hallway are also a common option.

There are models completely closed. Combined version, alternating with the open part of the furniture. Modern design allows you to create stylish beautiful models. For example, one of such solutions is multi-level segments.

They place the cabinet in the hallway so that it fits better into the interior, while being roomy and maximally functional. Share this choose the place where the most overall furniture is placed. This applies to small rooms. For spacious halls, the design concept influences the placement. White elegant items refresh the small lobby.

The nuances of choice

How to choose the right cabinet so that it is optimal in all respects, for this we repel:

from the dimensions of the room;
target internal content. For example, do you need a built-in refrigerator;
stylistic decisions;
material for its implementation;
quality fittings.

Given these points, you can correctly determine the choice of furniture. Particular attention should be paid to fittings, because this furniture carries a large functional load. Do-it-yourself wardrobe in the hallway with your own hands is the easiest way to make it from a laminated plate.

Algorithm of actions, step by step instructions:

layout of the closet. We make a sketch and drawing of furniture strictly in size;
at a company that is engaged in cutting laminate, we order a cut;
with the help of an end tape we process cuts of cut;
we purchase the necessary accessories;
we assemble the furniture, first the box, then the internal filling, and then we install the compartment doors;
align the furniture diagonally so that it is exposed evenly.

Separately, you can make a shelf for shoes, a depth of 30 cm will be enough. If you need to install an additional refrigerator, other household appliances, then you need to take into account their size.

Furniture salons in Mogilev offer a wide range of coupes in the hallway, factory, made to order. Many of our customers have used the services of the Mogilev furniture manufacturing company. The original models represent the new Italian collections of 2017 in the classical style, a new furniture catalog with photo printing. Knowing how to choose wardrobes in the hallway, you can easily choose the right option.